PULSAmatic

With PULSAmatic, we’ve greatly simplified metering pump automation. Just as importantly, we’ve helped cut the cost - initially and over the long run. Our proven system uses low energy brakes and a diamond screw. This effectively uses your PULSA Series pump’s own power to adjust stroke length or pump output. The compact PULSAmatic operator cover mounts in place of a typical manual hand wheel control to minimize floor space requirements.

Operating Benefits

• 24-volt electronics uses less energy than electrically motorized or pneumatic piston actuators.
• Unit has few moving parts. No belts, couplings or gear drives to service.
• Coordinated design enables PULSAmatic to retrofit to manual or pneumatic controlled PULSA Series pumps.
• Compact design does not require additional pump floor space.

Key Features

• Flow control is accomplished by low current electronic switching to energize small 24-volt increase or decrease brakes.
• The environmentally superior design has no exposed shafts or couplings. It also features optimum protection from signal equipment malfunction and operator errors.
• Miniature mechanical switches, which activate only when external imbalances occur, serve as full backup to electronic limits.
• Mechanical hand wheel override with override switch to manually control pump whenever necessary.
• Quality components such as clutched feedback and trim pots.
• Digital stroke length indicator calibrator 0-100% for instant recognition of pump output.
• Mechanical handwheel override with override switch to manually control pump whenever necessary.
• NEMA 4 watertight and UL listed NEMA 7 explosion-proof enclosures.
• Quality Components such as clutched feedback and trim pots.

Control Options

• Manual
• Auto/Manual
• Auto/Manual with meter readout
• Auto/Manual with ratio control and meter readout
• Panel mount componnets

Applicable Models

Pulsa 7120 Series

Pulsa 7440 Series

Pulsa 7660 Series

Pulsa 8480 Series